Philly Appliances Repair
Washer repair

Washer Not Filling With Water in Philadelphia.

A washer that starts its cycle but never takes water has a problem in the fill path, not in the motor or the drum. That is a short list of parts, all of them cheap, so this is usually a small repair rather than a big one.

4.8· 218 reviews, read our reviews on Google ·$89 diagnostic, applied to the repair ·90-day warranty
Philly Appliances Repair branded van
Check this first

Check this before you book.

  • Does the washer power on and start its cycle, but no water comes in?
The straightforward case

Yes narrows it a lot. The machine has power, the control board is working, and it is asking for water that is not arriving. That points at the fill path: the inlet valve, the screens behind it, the hoses, or the switch that tells the machine how full it is. None of those are big parts.

Book my repair →
Why it happens

Why a washer stops filling with water.

The usual culprits, in plain words. I confirm which one it is before quoting anything.
01

Failed water inlet valve

This is the electric valve that opens to let water into the tub, and it's really two valves in one, hot and cold, wired separately. They fail one at a time, which is why a machine can still fill on warm and go dead on cold. It's the cause I find most on this complaint.
02

Clogged inlet screens

Small filter screens sit right where the hoses meet the machine, and years of city water sediment pack them solid. Water trickles in instead of filling, or stops outright. Sometimes that's a cleaning, not a part, and I'll say so before I quote anything.
03

Water-level or pressure switch

The machine reads its own water level through a thin air hose running to a pressure switch. Split that hose, or fail that switch, and the washer is convinced it's already full, so it never opens the valve at all.
04

Door lock or lid switch

Most machines refuse water until they're certain the door is locked. A worn lock or lid switch leaves the washer sitting there lit up and silent, and from the outside it looks exactly like a water problem instead of a door problem.

How much does it cost to fix a washer that will not fill?

Every visit starts with a flat $89 diagnostic, and that $89 is applied to the repair. Every job is backed 90 days. If it is not worth fixing, I tell you that instead of selling you a repair.

FAQ

Washer fill questions, answered straight.

Straight answers on cost, coverage, timing and whether it's worth it. Still not sure? Text 267-388-3044.
Why is my washer not filling with water?
The most common cause is the water inlet valve, followed by clogged screens where the hoses connect. It can also be the water-level switch telling the machine it is already full, or a door lock that has to close before the machine will take water.
My washer fills on hot but not on cold. Is that the same problem?
Usually yes. The inlet valve has a separate solenoid for each side, and they fail one at a time. One side working is actually a helpful clue, because it rules out the water supply and the control board.
How much does it cost to fix a washer that will not fill?
Every visit starts with a flat $89 diagnostic and that $89 is applied to the repair. You get a clear price before any work begins, and the job is backed 90 days.
How fast can this be fixed?
We find the fault on the visit and you get the exact price then. The inlet valve, the screens and the water-level switch are ordered to your model, and we tell you the day the part lands.
All the questions people ask →
Why Philly keeps calling

What Philadelphia neighbors say after a washer repair.

Google reviews
4.8
based on 218 reviews
5
4
3
2
1
Write a Google review Read all reviews on Google →
MG
Melissa Gomez
★★★★★Verified

“Super responsive and fixed my washer and oven doors! Great job.”

KS
Kiersten Schumacher
★★★★★Verified

“Our washing machine stopped working and had an error flashing. This company made it easy to schedule an appointment and had someone out the next day. He fixed a blockage quickly & efficiently. Highly recommend!”

MA
Mike Andersen
★★★★★Verified

“I had a great experience working with Philly Appliances Repair. They came by on short notice to check out my washer, diagnosed the issue quickly, and got it repaired right away. They were friendly, professional, and took the time to explain what they were doing so I could understand a few things about how the appliance works. Communication was great from start to finish, quick responses and clear updates. I’d highly recommend this company to anyone who needs appliance repairs, and I’ll definitely be calling them again for any future needs.”

Owner-operated · Philadelphia
Booked in a text. Fixed by your neighbor.

"Philly Appliance Repairs were great - prompt, responsive and my washer is working like new…"

★★★★★ Majka S. · Google review
4.8· 218 Google reviews
Drained and spinning again. Let's get it fixed.
Book a repair →
or call 267-388-3044
CallBook my repair